Mold isn’t only an irritation; it can also be dangerous to your health. While inhabitants of California do not have to worry about mold as much as those who live in more humid areas, it can still be a problem. Learn how to prevent mold from growing in your windows and what to do if it does. Then contact Moldings Plus if you are considering replacing your doors or windows.
How to keep mold from growing on your windowsills
Mold cannot grow on windowsills without enough ventilation. Replace any old ventilation fans you have in your bathroom or kitchen if you want to prevent mold from growing. Newer models will almost certainly be more effective and efficient. Keep your windows open as much as possible to allow air to move freely. Fresh air, in fact, can help with a variety of air quality issues.
After that, look for ways to cut down on humidity and leaks. When you remove condensation from your home, you reduce moisture levels, which can limit mold’s ability to thrive. To remove moisture from the air, you can use a dehumidifier or a moisture eliminator. You can also upgrade your home’s ventilation system to allow moisture to escape into the attic. Make sure the air conditioner is set to at least 70 degrees Fahrenheit, if not higher.
It’s usually preferable to have your windows replaced if you’re struggling with leakage. You’re merely kicking the ball down the road to deal with later if you don’t. Moldings Plus can replace your windows with air-tight alternatives that make mold growth practically impossible.
How to get mold out of your windowsills
If it’s too late to prevent mold from growing on your windowsills, use these instructions to get rid of it. Remember that by the time mold spores have penetrated deeply enough into the wood or other material of your windows, removing the mold may take more time and effort than replacing them. Older windows can be replaced with modern types that are less prone to mildew in the future.
The key to successfully removing mold is to get started as soon as possible. This is an issue that can swiftly deteriorate. Begin by cleaning with a solution of bleach, dish soap, and water. Grab a dry cloth and a plastic scraper or brush. We also recommend that you take precautions to protect yourself, such as using safety goggles or a face mask. Mold, as previously said, can be deadly, and you should avoid inhaling any of the spores.
Before you begin cleaning, spray the mold to weigh it down and prevent the spores from spreading. Then, using the above-mentioned concentration, wash the mold. Remember that if you don’t take precautions to avoid future mold growth, it will return.
